Vishal Pneumatic Tools

LCC Bench Rammers are perfect compacting soil and sand in such applications as foundry molds, backfilling foundations, pipe work, and cable trenching, LCC tools are built to with stand heavy use in tough environments and include effective seal designs that keep internal components free from dirt and grit. Bench rammers Ideal for compacting small sand molds in a foundry or casting facility. Its unique double action “sand wiper” seal excludes dirt and grit from inside the tool for reduced wear and long life. LCC Rammers are 100% interchangeable and technically equivalent with the well known brand CP.

LCC 4711 - Lyra Bench Rammer
This unit feature of its shorter height and light weight allow this unit to be used on smaller molds that are setup waist high.

Features

• Time tested valve design.
• Front end seal excludes dirt and gas
• Round piston rod
• 63.5mm rubber butt included
• Interchangble Parts with other brands 

• Ideal for foundry applications
• Comfortable operation and high production
• Bench rammers used for casting sand in cylinders, large molds

LCC 9107 pneumatic pencil grinder is technically equivalent and its parts are 100% Interchangeable with well known Model CP - 9107.

LCC offers the widest range of grinders and sanders to cater to a variety of applications from surface finishing die contouring and repairs to heavy duty grinding. Every tool is built with the highest quality materials to ensure the tool delivers the extra mile.

Features: LCC Grinders have all the advantages of advance erogonomics. with the features required to enhanse the physical and mental well-being of operators, to achieve increased productivity levels.

High Power Motor - maintains high speed under load.

Heat Treated Internal Parts - for longer & lower maintenance costs.

Rugged Construction - to withstand tough use .

Easy to Service - enhances uptime of tools.

• High Power Motor - maintains high speed under load.
• Heat Treated Internal Parts - for longer & lower maintenance costs.
• Rugged Construction - to withstand tough use .
• Easy to Service - enhances uptime of tools.

LCC Sand Rammers are perfect compacting soil and sand in applications like foundry molds, backfilling foundations, pipe work, and cable trenching, LCC tools are built to with stand heavy use in tough environments and include effective seal designs that keep internal components free from dirt and grit. LCC Rammers are 100% interchangeable and technically equivalent with the well known brand CP.
LCC - 4003 - Lyra Sand rammers 
This unit features a long handle, heavier, stroke, two times the weight, and double the BPM of the bench model. This unit is easily held from a standing position while compacting very large molds at floor level.
Features

Time tested valve design.

Front end seal excludes dirt and gas

Round piston rod

73mm steel butt included

Interchangble Parts with other brands 

The LCCBBC120F drill is a heavy rock drill for both drifting and tunneling, and for benching and production drilling.
The drill is commonly used with 32mm (1 1/4″) and 38mm (1 1/2″) extension drills steel equipment and is suitable for both underground and surface work.
The LCCBBC120F drill has reversible rotation, which can also be disengaged so that only the impact mechanism works.
Air or water flushing of drill cuttings is possible, and all drill functions are operated from a remote control unit.
The drill is usually mounted on a BMS Feed Assembly and used on Wagon Drill. 

The LCC  0003 and LCC 0004 are designed to effectively compact soil around foundations and other structures, and for compacting backfill in trenches. Unlike the CP backfill tampers, many competitors on the market were designed for sand ramming only and thus lack the full power necessary for contracting operations. The LCC 0003 is designed to handle light-to-medium applications; the LCC 0004 is the ideal tool for heavier jobs.

• Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powered material
• Heat-treated cylinder and chrome plated piston - significantly extend tool life
• Adjustable packing-maintains a positive air seal
• Butt held with clamp screw - for quick, easy replacement
• Exhaust deflector - directs air, moisture and oil away from operator
• Integral oiler - continuously lubricates tool during operation
• Well balanced, smooth operation tool - easily guided by one personCP backfill tampers are designed to effectively compact soil around foundations and other structures, and for compacting backfill in trenches.

The LCC  0003 and LCC 0004 are designed to effectively compact soil around foundations and other structures, and for compacting backfill in trenches. Unlike the CP backfill tampers, many competitors on the market were designed for sand ramming only and thus lack the full power necessary for contracting operations. The LCC 0003 is designed to handle light-to-medium applications; the LCC 0004 is the ideal tool for heavier jobs.

• Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powered material
• Heat-treated cylinder and chrome plated piston - significantly extend tool life
• Adjustable packing-maintains a positive air seal
• Butt held with clamp screw - for quick, easy replacement
• Exhaust deflector - directs air, moisture and oil away from operator
• Integral oiler - continuously lubricates tool during operation
• Well balanced, smooth operation tool - easily guided by one personCP backfill tampers are designed to effectively compact soil around foundations and other structures, and for compacting backfill in trenches.
  • Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powdered material
  • Heat-treated cylinder and chrome plated piston - significantly extend tool life
  • Adjustable packing-maintains a positive air seal
  • Butt held with clamp screw - for quick, easy replacement

Atlas Copco Pick & Chipping Hammers are well-balanced & offer good chisel control. Compared to standard hammers, these models offer the operator a higher level of comfort & the same great Atlas Copco brand performance, without adding unnecessary weight. Atlas Copcos HAPSTM (Hand & Arm Protection System) helps reduce the operators exposure to vibrations.
The smallest models, such as TEX 03 PS and TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work.

The most popular CP chipping hammer of all times, the CP 4123 is used for a wide variety of construction and industrial applications, from light to medium chipping to heavy cutting.
Classic simplate valve
Heat treated cylinder
Now with spline lock instead of clip locking mechanism.
Powerful, yet compact and lightweight
Rugged construction, hardened steel cylinder and handle
Teasing throttle for precise control
Open grip handle with self closing outside trigger
Available in 2", 3", and 4" cylinder stroke versions
Choice of bushing: .680" Round chisel rotates freely; .580" Hex prevents chisel rotation

LCC have a versatile collection of Air Straight Grinder (6''Inc). LCC products are manufactured using best quality raw material, available in variegated designs and dimensions. Furthermore, We offer this range also in custom build models by our patrons. Our clients widely appreciate his offered range of the products owing to their sturdy construction, corrosion resistance, optimum performance and durability. LCC Models are 100% Equivalent and its Parts are also Interchangeable with well known brand Chicago Pneumatic.

Applications :

Excellence for Casting Cleaning

Weld Smoothening

Heavy Duty Grinder

Smoothening of Forgings Etc.

Our Grinder is mainly used in industries related to 

Fabrication Shops

Foundries, Shipyards

Construction

Petro chemical equipment & Forging Units.

Features of LCC 3140B

Rugged construction to withstand tough use.

High powered motor, maintains high constant speed.

Steel motor housing. 

Wheel size capacity from 100mm to 200mm

Additional Information:

• Packaging Details: Box

The LCC 4130 hammer is designed to tackle punishing jobs with the hard hitting power that you expect from CP. It is used for medium-duty to heavy-duty chipping, cutting and trimming operations. The four-bolt handle provides higher air flow and durability.

• Locking mechanism with four high-strength 1⁄2" bolts
• "D" handle with outside trigger and extra safety mechanism
• Muffler assembly as standard
• Simplate valve for smooth operation
• Strong and reliable
• Available in 3" or 4" cylinder stroke versions
• Choice of bushing: .680" Round chisel rotates freely; .580" Hex prevents chisel rotation

The most popular LCC chipping hammer of all times, the LCC 4123, is used for a wide variety of construction and industrial applications, from light to medium chipping to heavy cutting. Choose the cylinder size that best suits your particular application. The extra features of the LCC 4125 make it more suitable for tough construction and industrial applications, rugged use in foundries, shipyards, refineries or fabrication shops. In a dirty or warm air environment, the LCC 4125 will still hit hard in a consistent way, be reliable and last longer than conventional hammers. LCC Chipping Hammers are technically equivalent and all the parts are also interchangeable with well known brand CP Models.
• Heat treated cylinder
• Spline locking to prevent loosening of handle or cylinder
• Powerful, yet compact and lightweight
• Rugged construction, hardened steel cylinder and handle
• Teasing throttle for precise control
• Pistol grip handle with self closing outside trigger
• Available in 2”, 3” or 4” cylinder stroke versions
• Choice of bushing: .680” Round, chisel rotates freely .580” Hex, prevents chisel rotation
• Classic simplate valve (4123)
• Unique ring valve as standard for harder blow in tough applications or dirty environments (4125)
• Chrome plated cylinder for extra durability (4125)

• Light weight, compact tool with contoured grip handle - reduces operator fatigue; increases output
• Tungsten carbide-tipped pistons - last longer; are easily replaced
• Back head grip - gives in-line thrust
• Chamfered cylinder block - increases visibility of the work piece permitting close-up operation in corner

LCC parts are 100% Interchangable with other well known brands of breakers like cp, edicon, ace etc. LCC parts manufactured to the same exact standards as our equipment and have passed extensive endurance tests. Original parts avoid problems such as premature failures and lack of performance. Using original parts has proven to be the best way to protect your machine from poor performance and to ensure your machine is working according to the original factory specifications.