Vishal Pneumatic Tools

Triplex Pump 200ML is a High Pressure Triplex Reprocating Pumps areCompact,Sturdy and Designed for Long Trouble free life and easy transportability.These areextensively for diamond core drilling,Salt Water disposal Process Pumping of abrasivematerials,spraying ,jet-cleaning of processing and material -handling equipment andremoval of industrial containments from air with high pressure fog.Triplex Pump have three cylinders fluid end and replaceable hard chromed plated cylinderschrome steel ball valves & stainless steel valve seats.All moving parts are completelyenclosed and run in an oil bath.The Pump equipped with pressure guaze,relief valve suctionand delivery fitting.These pumps can handle clear water or light drilling mud,hot and cold water ,brines,Lightoil abrasive solution at an output rate of up to gallons a minute.The Drive for these pumpdirect V-belt or change drive with pulley or throught 5-Speed transmission gear.The pumpwith 5-speed transmission gear enable the dealer to control volume over a wide rangewithout by passing excess output or changing liners and pistons.These pumps are idle forwire line drilling where closed circuit circulation is necessary.Output is varied by means of 5-speed transmissions which control the pump speed.Pump Selection for diamond drilling:Diamond Drilling Produces cutting and heat and acontinuos flow of water is necessary to keep the bit cool and remove the cutting.A pressurepump of the positive displacement type is necessary to supply the required quantity of waterto maintain a satisfactory velocity in the annual space between the rod and the wall of the ofthe hole for good hole cleaning.The pump selected should be rugged;light weighted and should have sufficient to attain theminimum velocity.In many cases it is not possible to use clean water and hence the pumpselected be handle dirty return water as well as dirty return water as dirty drilling mud.